Curtain WIRE Mounting Solutions
Welcome to our website! At 4 Gardine we offer modern curtain wire mounting solutions — either completely screw‑ and glue‑free or with traditional screw fastenings. Our curtain wire sets are safe, convenient and visually stylish. We also provide decorative add-on details in different colours, helping you add warmth and colour accents. We hope you’ll find the perfect solution for your curtains and windows in our range!
What We Improved
Safer and More Visually Stylish Solutions!
– Compared with conventional curtain wire sets, the ends of our A.2 screw‑mounted system and our B.2 and Basic metall clips systems are enclosed in special plastic caps. This makes everyday use safer and gives a cleaner visual finish.
No Screws, NO Glue!
– The B.2 and Basic metal clip solutions let you secure the curtain wire without damaging the frame. Cut the wire to the recommended length and tension it between the metal clips mounted behind the frame edge. Curtain in place, frame intact!
– Suitable only for Tilt‑and‑Turn type windows with a fram‑edge thickness of 15–17 mm.
– The interchangeable caps of our curtain wire sets let you add personality and warmth. In the Decor range we offer floral decorative caps in four colours. We hope you’ll find the perfect match for your curtains!
Curtain Wire Length
– Our curtain wire is a steel spring coated with easy‑to‑clean PVC. The diameter is 4 mm. Because it is a spring, please follow our cut-to-length guidance — especially for the B.2 and Basic clip-mounted solutions. A wire cut too short can over-stress the clips; too long will not create enough tension for stability.
– A wire cut to the recommended length and used on window frames of 15–17 mm edge thickness ensures that the solution stays firmly in place without screws or glue.
– For the A.2 system we advise first attaching the screwed metal eyelet at one end of the wire to the screw inside the plastic part on the window frame. Keeping the wire slightly tensioned, stretch it to the second screw. The recommended cutting point is 5–6 cm before that screw. This minimises sagging in the centre (see installation video on the A.2 product page).
Special Plastic Parts
– The plastic parts are cylindrical with a cap; the connections of the curtain‑wire ends are hidden inside, making the construction safer and visually cleaner.
– All plastic parts and accessories (Flowers) are made of polyoxymethylene (POM), which is resistant to temperature fluctuations and UV protected.
– The most visible difference lies in the lids shape: A.2 and B.2 have gently domed caps, while the Basic solution uses flat ones.
– In the A.2 plastic part there is an opening in the base through which the piece is screwed into place and a separate opening for the wire.
– In the B.2 and Basic the base of the cylindrical part has a groove for the clip to snap into, and separate openings for the curtain wire and the metall clip.
Our Solutions
WITH SCREWS
WITH METAL CLAMPS
WITH METAL CLAMPS
EXTRA DETAILS
FAQ:
1. 
2. 
3. 
Our solutions suit lighter curtains. If the window meets our specs and you install the system correctly, 110 cm of curtain wire supports a 500 g curtain without sagging (photo: Basic solution under test).